Case Study conducted by Pro Enviro on the installation of an automated Monitoring and Targeting (aM&T) System
The new SEE Change, aM&T system makes use of 3-phase pulse output electricity meters and a variety of suitably rated pulse output natural gas meters all collecting consumption data from the heat treatment furnaces and their ancillary equipment and transmitting data online to secure, dedicated SEE Change servers.
Case Study conducted by Pro Enviro on Improved Competitiveness Through Process Optimisation
Pro Enviro were engaged to undertake a full assessment of the gas-fired plant and prepare a suitable programme of action to reduce costs per tonne of output.
Case Study conducted by Pro Enviro on the Design, Supply and Installation of Energy Efficient Variable Speed Drives / Variable Frequency Drives
Eight Variable Speed Drives (VSD) / Variable Frequency Drives (VFD) controllers were designed with the aim to provide full control of the frequencies and speeds of the rotation of the motors and pumps located on the Hot Mills.
Case Study conducted by Pro Enviro on the Successful Implementation of Net-Zero Carbon Strategy and Sustainable Solution Projects
By 2020 carbon emissions from electricity, gas and water had reduced by 83% (equivalent to 2,800 tonnes of CO2e on 2014 levels. Installing solar panels was seen as an excellent way to lower the business’ carbon footprint. It is a natural, renewable source which produces little or no emissions when it is converted to electricity.
Case Study conducted by Pro Enviro on the Design, Supply and Installation of an automated Monitoring and Targeting (aM&T) System
Servosteel had a rudimentary energy data collection system that had been installed approximately 15 years earlier and this provided data which was transferred into spreadsheets for a handful of the energy intensive equipment in the factory. The new SEE Change aM&T system was designed to utilise the electric, gas, water and steam meters that were already in place and installed a range of new electricity sub meters to collect data from the new pieces of energy consuming equipment.
Case Study conducted by Pro Enviro on the Installation of an aM&T System
An incremental approach has been taken to improve the business’ understanding of the drivers of energy consumption including a benchmarking exercise to determine the current position of the business against Best Available Techniques in energy consumption per unit of casting